Universal Fit STANDARD grade Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly.
US EPA and Canadian certified and approved for the vehicles listed below.
vehicle | engine | year | description |
---|---|---|---|
MERCURY CAPRI | 3.8L | 1986 | Front Right; Cutting and welding required during installation |
MERCURY CAPRI | 3.8L | 1985 | Front Right; Cutting and welding required during installation |
MERCURY CAPRI | 3.8L | 1984 | Front Right; Cutting and welding required during installation |
MERCURY CAPRI | 3.8L | 1983 | Front Right; Cutting and welding required during installation |
MERCURY CAPRI | 4.2L | 1982 | Front Right; Cutting and welding required during installation |
MERCURY CAPRI | 4.2L | 1981 | Front Right; Cutting and welding required during installation |
MERCURY CAPRI | 4.2L | 1980 | Front Right; Cutting and welding required during installation |
MERCURY MARQUIS | 3.8L | 1984 | Passenger Side; Cutting and welding required during installation |
MERCURY ZEPHYR | 4.2L | 1982 | Front Right; Cutting and welding required during installation |
MERCURY ZEPHYR | 4.2L | 1981 | Front Right; Cutting and welding required during installation |
MERCURY ZEPHYR | 4.2L | 1980 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1981 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1984 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1988 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1982 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1980 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1983 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1985 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1985 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1989 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1987 | Front Right; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1986 | Front Right; Cutting and welding required during installation |
PLYMOUTH VOLARE | 5.2L | 1980 | Front Right; Cutting and welding required during installation |
LINCOLN CONTINENTAL | 5L | 1985 | Cutting and welding required during installation |
LINCOLN CONTINENTAL | 5L | 1986 | Cutting and welding required during installation |
LINCOLN CONTINENTAL | 5L | 1987 | Cutting and welding required during installation |
LINCOLN MARK VII | 5L | 1988 | Cutting and welding required during installation |
LINCOLN MARK VII | 5L | 1989 | Cutting and welding required during installation |
LINCOLN MARK VII | 5L | 1990 | Cutting and welding required during installation |
LINCOLN MARK VII | 5L | 1991 | Cutting and welding required during installation |
LINCOLN MARK VII | 5L | 1992 | Cutting and welding required during installation |
FORD THUNDERBIRD | 5L | 1991 | Cutting and welding required during installation |
FORD THUNDERBIRD | 5L | 1992 | Cutting and welding required during installation |
FORD THUNDERBIRD | 5L | 1993 | Cutting and welding required during installation |
MERCURY COUGAR | 5L | 1991 | Cutting and welding required during installation |
MERCURY COUGAR | 5L | 1992 | Cutting and welding required during installation |
MERCURY COUGAR | 5L | 1993 | Cutting and welding required during installation |
DODGE D250 | 5.2L | 1985 | Front; Cutting and welding required during installation |
DODGE D250 | 5.9L | 1985 | Front; Cutting and welding required during installation |
DODGE D250 | 5.2L | 1986 | Front; Cutting and welding required during installation |
DODGE D250 | 5.9L | 1986 | Front; Cutting and welding required during installation |
DODGE D250 | 5.2L | 1987 | Front; Cutting and welding required during installation |
DODGE D250 | 5.9L | 1987 | Front; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1979 | Front; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1980 | Front; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1982 | Front; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1983 | Front; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1984 | Front; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1985 | Front; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1986 | Front; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1987 | Front; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1988 | Front; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1989 | Front; Cutting and welding required during installation |
CHRYSLER IMPERIAL | 5.2L | 1982 | Front; Cutting and welding required during installation |
CHRYSLER IMPERIAL | 5.2L | 1983 | Front; Cutting and welding required during installation |
CHRYSLER LEBARON | 5.2L | 1979 | Front; Cutting and welding required during installation |
CHRYSLER LEBARON | 5.2L | 1980 | Front; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1980 | Front; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1982 | Front; Cutting and welding required during installation |
DODGE ASPEN | 5.2L | 1979 | Front; Cutting and welding required during installation |
DODGE ASPEN | 5.2L | 1980 | Front; Cutting and welding required during installation |
DODGE DIPLOMAT | 5.2L | 1979 | Front; Cutting and welding required during installation |
DODGE DIPLOMAT | 5.2L | 1980 | Front; Cutting and welding required during installation |
DODGE DIPLOMAT | 5.2L | 1982 | Front; Cutting and welding required during installation |
DODGE DIPLOMAT | 5.2L | 1983 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1980 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1982 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1983 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1988 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1984 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1985 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1986 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1987 | Front; Cutting and welding required during installation |
PLYMOUTH GRAN FURY | 5.2L | 1989 | Front; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1979 | Front Left; 4BBL; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1979 | Front Right; 4BBL; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1980 | Front Left; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1980 | Front Right; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1981 | Front Left; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1981 | Front Right; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1982 | Front Left; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1982 | Front Right; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1983 | Front Left; Cutting and welding required during installation |
CHRYSLER CORDOBA | 5.2L | 1983 | Front Right; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1983 | Front Left; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1983 | Front Right; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1984 | Front Left; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1984 | Front Right; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1985 | Front Left; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1985 | Front Right; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1986 | Front Left; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1986 | Front Right; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1987 | Front Left; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1987 | Front Right; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1988 | Front Left; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1988 | Front Right; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1989 | Front Left; Cutting and welding required during installation |
CHRYSLER FIFTH AVENUE | 5.2L | 1989 | Front Right; Cutting and welding required during installation |
CHRYSLER IMPERIAL | 5.2L | 1981 | Front Left; Cutting and welding required during installation |
CHRYSLER IMPERIAL | 5.2L | 1981 | Front Right; Cutting and welding required during installation |
CHRYSLER IMPERIAL | 5.2L | 1982 | Front Left; Cutting and welding required during installation |
CHRYSLER IMPERIAL | 5.2L | 1982 | Front Right; Cutting and welding required during installation |
CHRYSLER IMPERIAL | 5.2L | 1983 | Front Left; Cutting and welding required during installation |
CHRYSLER IMPERIAL | 5.2L | 1983 | Front Right; Cutting and welding required during installation |
CHRYSLER LEBARON | 5.2L | 1980 | Front Left; Cutting and welding required during installation |
CHRYSLER LEBARON | 5.2L | 1980 | Front Right; Cutting and welding required during installation |
CHRYSLER LEBARON | 5.2L | 1981 | Front Left; Cutting and welding required during installation |
CHRYSLER LEBARON | 5.2L | 1981 | Front Right; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1979 | Front Left; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1979 | Front Right; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.9L | 1979 | Front Left; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.9L | 1979 | Front Right; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1980 | Front Left; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1980 | Front Right; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.9L | 1980 | Front Left; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.9L | 1980 | Front Right; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1981 | Front Left; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1981 | Front Right; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1982 | Front Left; Cutting and welding required during installation |
CHRYSLER NEW YORKER | 5.2L | 1982 | Front Right; Cutting and welding required during installation |
CHRYSLER NEWPORT | 5.2L | 1979 | Front Left; Cutting and welding required during installation |
CHRYSLER NEWPORT | 5.2L | 1979 | Front Right; Cutting and welding required during installation |
CHRYSLER NEWPORT | 5.2L | 1980 | Front Left; Cutting and welding required during installation |
CHRYSLER NEWPORT | 5.2L | 1980 | Front Right; Cutting and welding required during installation |
CHRYSLER NEWPORT | 5.9L | 1980 | Front Left; Cutting and welding required during installation |
CHRYSLER NEWPORT | 5.9L | 1980 | Front Right; Cutting and welding required during installation |
CHRYSLER NEWPORT | 5.2L | 1981 | Front Left; Cutting and welding required during installation |
CHRYSLER NEWPORT | 5.2L | 1981 | Front Right; Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 5.2L | 1980 | Front Left; Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 5.2L | 1980 | Front Right; Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 5.2L | 1981 | Front Left; Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 5.2L | 1981 | Front Right; Cutting and welding required during installation |
DODGE ASPEN | 5.2L | 1980 | Front Left; Cutting and welding required during installation |
DODGE ASPEN | 5.2L | 1980 | Front Right; Cutting and welding required during installation |
DODGE COLT | 1.5L | 1985 | Front; With Air Tube |
DODGE COLT | 1.5L | 1985 | Front; Cutting and welding required during installation |
DODGE COLT | 1.5L | 1986 | Front; With Air Tube |
DODGE COLT | 1.5L | 1986 | Front; Cutting and welding required during installation |
DODGE D100 | 5.2L | 1986 | Cutting and welding required during installation |
DODGE D100 | 5.9L | 1986 | Cutting and welding required during installation |
DODGE D100 | 5.2L | 1987 | Cutting and welding required during installation |
DODGE D100 | 5.9L | 1987 | Cutting and welding required during installation |
DODGE D100 | 5.9L | 1988 | Cutting and welding required during installation |
DODGE D150 | 5.2L | 1982 | Front; Cutting and welding required during installation |
DODGE D150 | 5.9L | 1982 | Front; Cutting and welding required during installation |
DODGE D150 | 5.2L | 1983 | Front; Cutting and welding required during installation |
DODGE D150 | 5.2L | 1984 | Front; Cutting and welding required during installation |
DODGE D150 | 5.9L | 1984 | Front; Cutting and welding required during installation |
DODGE D150 | 5.2L | 1985 | Front; Cutting and welding required during installation |
DODGE D150 | 5.9L | 1985 | Front; Cutting and welding required during installation |
DODGE D150 | 5.2L | 1986 | Front; Cutting and welding required during installation |
DODGE D150 | 5.9L | 1986 | Front; Cutting and welding required during installation |
DODGE D150 | 5.
Write a Review
Write a ReviewMagnaflowMagnaflow 50005 Universal Federal (Exc.CA) |