Universal Fit STANDARD grade Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly.
US EPA and Canadian certified and approved for the vehicles listed below.
vehicle | engine | year | description |
---|---|---|---|
AUDI A6 QUATTRO | 2.7L | 2000 | Rear Right; Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.7L | 2000 | Rear Left; Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.7L | 2001 | Rear Right; Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.7L | 2002 | Rear Right; Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.7L | 2002 | Rear Left; Cutting and welding required during installation |
BMW 750IL | 5.4L | 1995 | Passenger Side; Cutting and welding required during installation |
BMW 750IL | 5.4L | 1995 | Driver Side; Cutting and welding required during installation |
BUICK CENTURY | 3.1L | 1997 | Cutting and welding required during installation |
BUICK CENTURY | 3.1L | 1998 | Cutting and welding required during installation |
BUICK CENTURY | 3.1L | 1999 | Cutting and welding required during installation |
BUICK CENTURY | 3.1L | 2000 | Cutting and welding required during installation |
BUICK RENDEZVOUS | 3.4L | 2002 | Cutting and welding required during installation |
BUICK RENDEZVOUS | 3.4L | 2003 | Cutting and welding required during installation |
BUICK LACROSSE | 3.8L | 2005 | Cutting and welding required during installation |
CHEVROLET IMPALA | 3.4L | 2000 | Cutting and welding required during installation |
CHEVROLET LUMINA | 3.1L | 1997 | Cutting and welding required during installation |
CHEVROLET LUMINA | 3.1L | 1998 | Cutting and welding required during installation |
CHEVROLET LUMINA | 3.1L | 1999 | Cutting and welding required during installation |
CHEVROLET LUMINA | 3.1L | 2000 | Cutting and welding required during installation |
CHEVROLET LUMINA | 3.1L | 2001 | Cutting and welding required during installation |
CHEVROLET MALIBU | 3.1L | 1997 | Cutting and welding required during installation |
CHEVROLET MALIBU | 3.1L | 1998 | Cutting and welding required during installation |
CHEVROLET MALIBU | 3.1L | 1999 | Cutting and welding required during installation |
CHEVROLET MALIBU | 3.1L | 2000 | Cutting and welding required during installation |
CHEVROLET MALIBU | 3.1L | 2001 | Cutting and welding required during installation |
CHEVROLET MALIBU | 3.1L | 2002 | Cutting and welding required during installation |
CHEVROLET MALIBU | 3.1L | 2003 | Cutting and welding required during installation |
CHEVROLET MONTE CARLO | 3.1L | 1999 | Cutting and welding required during installation |
CHEVROLET MONTE CARLO | 3.1L | 1997 | Cutting and welding required during installation |
CHEVROLET MONTE CARLO | 3.1L | 1998 | Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 2002 | FWD; Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 2003 | FWD; Cutting and welding required during installation |
HONDA PASSPORT | 3.2L | 2000 | Driver Side; Automatic Trans; Cutting and welding required during installation |
HONDA PASSPORT | 3.2L | 2000 | Passenger Side; Automatic Trans; Cutting and welding required during installation |
HONDA PASSPORT | 3.2L | 2001 | Driver Side; Automatic Trans; Cutting and welding required during installation |
HONDA PASSPORT | 3.2L | 2001 | Passenger Side; Automatic Trans; Cutting and welding required during installation |
HONDA PASSPORT | 3.2L | 2002 | Driver Side; Automatic Trans; Cutting and welding required during installation |
HONDA PASSPORT | 3.2L | 2002 | Passenger Side; Automatic Trans; Cutting and welding required during installation |
HYUNDAI SONATA | 2.4L | 2006 | Cutting and welding required during installation |
HYUNDAI SONATA | 2.4L | 2007 | Cutting and welding required during installation |
HYUNDAI SONATA | 2.4L | 2008 | Rear; Cutting and welding required during installation |
HYUNDAI SONATA | 2.4L | 2009 | Rear; Cutting and welding required during installation |
JEEP LIBERTY | 3.7L | 2004 | Front Right; Cutting and welding required during installation |
JEEP LIBERTY | 3.7L | 2004 | Front Left; Cutting and welding required during installation |
KIA OPTIMA | 2.4L | 2006 | Cutting and welding required during installation |
KIA OPTIMA | 2.4L | 2007 | Cutting and welding required during installation |
KIA RONDO | 2.4L | 2007 | Rear; Cutting and welding required during installation |
KIA RONDO | 2.4L | 2008 | Rear; Cutting and welding required during installation |
KIA OPTIMA | 2.4L | 2008 | Rear; Cutting and welding required during installation |
KIA OPTIMA | 2.4L | 2009 | Rear; Cutting and welding required during installation |
KIA RONDO | 2.4L | 2009 | Rear; Cutting and welding required during installation |
MERCEDES-BENZ C280 | 2.8L | 1998 | Rear Left; Cutting and welding required during installation |
MERCEDES-BENZ C280 | 2.8L | 1999 | Rear Left; Cutting and welding required during installation |
MERCEDES-BENZ C280 | 2.8L | 2000 | Rear Left; Cutting and welding required during installation |
MERCEDES-BENZ CL500 | 5L | 1998 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ CL500 | 5L | 1998 | Front Right; Cutting and welding required during installation |
MERCEDES-BENZ CL500 | 5L | 1999 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ CL500 | 5L | 1999 | Front Right; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 2001 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 2001 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 2002 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 2002 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 1998 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 1998 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 1999 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 1999 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 2000 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ E430 | 4.3L | 2000 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ S430 | 4.3L | 2000 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ S430 | 4.3L | 2000 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ S430 | 4.3L | 2001 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ S430 | 4.3L | 2001 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ S430 | 4.3L | 2002 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ S430 | 4.3L | 2002 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ S430 | 4.3L | 2003 | Driver Side; Cutting and welding required during installation |
MERCEDES-BENZ S430 | 4.3L | 2003 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ S500 | 5L | 1999 | Front Right; Cutting and welding required during installation |
OLDSMOBILE ACHIEVA | 3.1L | 1998 | Cutting and welding required during installation |
OLDSMOBILE ALERO | 3.4L | 1999 | Cutting and welding required during installation |
OLDSMOBILE ALERO | 3.4L | 2000 | Cutting and welding required during installation |
OLDSMOBILE ALERO | 3.4L | 2001 | Cutting and welding required during installation |
OLDSMOBILE ALERO | 3.4L | 2002 | Cutting and welding required during installation |
OLDSMOBILE ALERO | 3.4L | 2003 | Cutting and welding required during installation |
OLDSMOBILE CUTLASS | 3.1L | 1997 | Cutting and welding required during installation |
OLDSMOBILE CUTLASS | 3.1L | 1998 | Cutting and welding required during installation |
OLDSMOBILE CUTLASS | 3.1L | 1999 | Cutting and welding required during installation |
OLDSMOBILE CUTLASS SUPREME | 3.1L | 1996 | Cutting and welding required during installation |
OLDSMOBILE CUTLASS SUPREME | 3.1L | 1997 | Cutting and welding required during installation |
OLDSMOBILE ALERO | 3.4L | 2004 | Cutting and welding required during installation |
PONTIAC AZTEK | 3.4L | 2001 | FWD; Cutting and welding required during installation |
PONTIAC GRAND AM | 3.4L | 1999 | Cutting and welding required during installation |
PONTIAC GRAND AM | 3.4L | 2000 | Cutting and welding required during installation |
PONTIAC GRAND AM | 3.4L | 2001 | Cutting and welding required during installation |
PONTIAC GRAND AM | 3.4L | 2002 | Cutting and welding required during installation |
PONTIAC GRAND AM | 3.4L | 2003 | Cutting and welding required during installation |
PONTIAC GRAND AM | 3.1L | 1997 | Cutting and welding required during installation |
PONTIAC GRAND AM | 3.1L | 1998 | Cutting and welding required during installation |
PONTIAC GRAND PRIX | 3.1L | 1996 | Cutting and welding required during installation |
PONTIAC GRAND PRIX | 3.1L | 1999 | Cutting and welding required during installation |
PONTIAC GRAND PRIX | 3.1L | 2000 | Cutting and welding required during installation |
PONTIAC GRAND PRIX | 3.1L | 1997 | Cutting and welding required during installation |
PONTIAC GRAND PRIX | 3.1L | 1998 | Cutting and welding required during installation |
PONTIAC MONTANA | 3.4L | 2002 | FWD; Cutting and welding required during installation |
PONTIAC MONTANA | 3.4L | 2003 | FWD; Cutting and welding required during installation |
PONTIAC TRANS SPORT | 3.4L | 1997 | Cutting and welding required during installation |
PONTIAC TRANS SPORT | 3.4L | 1998 | Cutting and welding required during installation |
PONTIAC GRAND AM | 3.4L | 2004 | Cutting and welding required during installation |
PONTIAC GRAND PRIX | 3.8L | 2004 | Cutting and welding required during installation |
PONTIAC GRAND PRIX | 3.8L | 2005 | Cutting and welding required during installation |
PONTIAC GRAND AM | 3.4L | 2005 | Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.7L | 2001 | Rear Left; Cutting and welding required during installation |
MERCEDES-BENZ S500 | 5L | 1999 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ S500 | 5L | 1998 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ S500 | 5L | 1998 | Front Right; Cutting and welding required during installation |
MERCEDES-BENZ S500 | 5L | 1997 | Front Right; Cutting and welding required during installation |
MERCEDES-BENZ S500 | 5L | 1997 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ S420 | 4.2L | 1996 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ S420 | 4.2L | 1996 | Front Right; Cutting and welding required during installation |
MERCEDES-BENZ S420 | 4.2L | 1997 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ S420 | 4.2L | 1997 | Front Right; Cutting and welding required during installation |
MERCEDES-BENZ S420 | 4.2L | 1998 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ S420 | 4.2L | 1998 | Front Right; Cutting and welding required during installation |
MERCEDES-BENZ S420 | 4.2L | 1999 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ S420 | 4.2L | 1999 | Front Right; Cutting and welding required during installation |
VOLVO S80 | 2.8L | 1999 | Cutting and welding required during installation |
VOLVO S80 | 2.8L | 2000 | Cutting and welding required during installation |
VOLVO S80 | 2.8L | 2001 | Cutting and welding required during installation |
PONTIAC AZTEK | 3.4L | 2002 | AWD; Cutting and welding required during installation |