Universal Fit STANDARD grade Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly.
US EPA and Canadian certified and approved for the vehicles listed below.
vehicle | engine | year | description |
---|---|---|---|
TOYOTA CELICA | 2L | 1988 | Cutting and welding required during installation |
TOYOTA CELICA | 2L | 1989 | Cutting and welding required during installation |
TOYOTA CELICA | 2L | 1990 | Cutting and welding required during installation |
SAAB 9000 | 2.3L | 1998 | Turbocharged; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2000 | Rear Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2000 | Front Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2001 | Rear Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2001 | Front Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2002 | Rear Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2002 | Front Left; Cutting and welding required during installation |
BMW Z3 | 1.9L | 1996 | Cutting and welding required during installation |
BMW Z3 | 1.9L | 1997 | Cutting and welding required during installation |
BMW Z3 | 1.9L | 1998 | Cutting and welding required during installation |
CADILLAC CATERA | 3L | 1997 | Driver Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 1997 | Passenger Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 1998 | Driver Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 1998 | Passenger Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 1999 | Driver Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 1999 | Passenger Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 2000 | Driver Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 2000 | Passenger Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 2001 | Driver Side; Cutting and welding required during installation |
CADILLAC CATERA | 3L | 2001 | Passenger Side; Cutting and welding required during installation |
CHEVROLET CAMARO | 5.7L | 1996 | Passenger Side; Cutting and welding required during installation |
CHEVROLET CAMARO | 5.7L | 1997 | Passenger Side; Cutting and welding required during installation |
CHEVROLET CAMARO | 5.7L | 1998 | Passenger Side; Cutting and welding required during installation |
CHEVROLET CAMARO | 5.7L | 1999 | Passenger Side; Cutting and welding required during installation |
CHEVROLET CAPRICE | 5.7L | 1996 | Driver Side; Cutting and welding required during installation |
CHEVROLET CAPRICE | 5.7L | 1996 | Passenger Side; Cutting and welding required during installation |
CHEVROLET CAPRICE | 4.3L | 1996 | Driver Side; Cutting and welding required during installation |
CHEVROLET CAPRICE | 4.3L | 1996 | Passenger Side; Cutting and welding required during installation |
CHEVROLET IMPALA | 5.7L | 1996 | Driver Side; Cutting and welding required during installation |
CHEVROLET IMPALA | 5.7L | 1996 | Passenger Side; Cutting and welding required during installation |
CHEVROLET TRACKER | 1.6L | 1998 | Cutting and welding required during installation |
CHEVROLET TRACKER | 1.6L | 1999 | Front; California Emissions Equipped Vehicles Registered Outside of California |
CHEVROLET TRACKER | 2L | 1999 | Front; California Emissions Equipped Vehicles Registered Outside of California |
CHEVROLET TRACKER | 1.6L | 2000 | Front; California Emissions Equipped Vehicles Registered Outside of California |
CHEVROLET TRACKER | 2L | 2000 | Front; California Emissions Equipped Vehicles Registered Outside of California |
CHEVROLET TRACKER | 2L | 2001 | Front; Cutting and welding required during installation |
CHEVROLET TRACKER | 2L | 2002 | Front; Cutting and welding required during installation |
CHEVROLET TRACKER | 2L | 2003 | Front; Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 1997 | Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 1998 | Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 1999 | Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 2000 | Cutting and welding required during installation |
CHRYSLER CIRRUS | 2.5L | 2000 | Cutting and welding required during installation |
CHRYSLER CIRRUS | 2.5L | 1998 | Cutting and welding required during installation |
CHRYSLER CIRRUS | 2.5L | 1999 | Cutting and welding required during installation |
CHRYSLER CIRRUS | 2.4L | 1996 | Cutting and welding required during installation |
CHRYSLER CIRRUS | 2.5L | 1996 | Cutting and welding required during installation |
CHRYSLER CIRRUS | 2.4L | 1997 | Cutting and welding required during installation |
CHRYSLER CIRRUS | 2.5L | 1997 | Cutting and welding required during installation |
CHRYSLER GRAND VOYAGER | 3L | 2000 | Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2002 | Rear; Coupe; Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2003 | Rear; Coupe; Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2001 | Rear; Coupe; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.5L | 1996 | Convertible; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 1997 | Convertible; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.5L | 1997 | Convertible; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 1998 | Convertible; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.5L | 1998 | Convertible; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.5L | 1999 | Convertible; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.5L | 2000 | Convertible; Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 1996 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 1996 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 1999 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 1999 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 2000 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 2000 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 1997 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 1997 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 1998 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 1998 | Cutting and welding required during installation |
CHRYSLER VOYAGER | 3L | 2000 | Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2004 | Rear; Coupe; Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2005 | Rear; Coupe; Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 1996 | Cutting and welding required during installation |
DODGE CARAVAN | 3.8L | 1996 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 1996 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 1996 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 1997 | Cutting and welding required during installation |
DODGE CARAVAN | 3.8L | 1997 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 1997 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 1997 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 1998 | Cutting and welding required during installation |
DODGE CARAVAN | 3.8L | 1998 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 1998 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 1998 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 1999 | Cutting and welding required during installation |
DODGE CARAVAN | 3.8L | 1999 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 1999 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 1999 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 2000 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 2000 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 2000 | Cutting and welding required during installation |
DODGE DAKOTA | 2.5L | 1996 | Cutting and welding required during installation |
DODGE DAKOTA | 2.5L | 1997 | Cutting and welding required during installation |
DODGE DAKOTA | 2.5L | 1998 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 1996 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 1996 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 1996 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 1997 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 1997 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 1997 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 1998 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 1998 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 1998 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 1999 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 1999 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 1999 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 2000 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 2000 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 2000 | Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 1996 | Cutting and welding required during installation |
DODGE STRATUS | 2L | 1996 | Cutting and welding required during installation |
DODGE STRATUS | 2.5L | 1996 | Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 1997 | Cutting and welding required during installation |
DODGE STRATUS | 2L | 1997 | Cutting and welding required during installation |
DODGE STRATUS | 2.5L | 1997 | Cutting and welding required during installation |
DODGE STRATUS | 2.5L | 1998 | Cutting and welding required during installation |
DODGE STRATUS | 2.5L | 1999 | Cutting and welding required during installation |
DODGE STRATUS | 2.5L | 2000 | Cutting and welding required during installation |
DODGE STRATUS | 3L | 2001 | Rear; Coupe; Cutting and welding required during installation |
DODGE STRATUS | 3L | 2002 | Rear; Coupe; Cutting and welding required during installation |
DODGE STRATUS | 3L | 2003 | Rear; Coupe; Cutting and welding required during installation |
DODGE STRATUS | 3L | 2004 | Rear; Coupe; Cutting and welding required during installation |
DODGE STRATUS | 3L | 2005 | Rear; Coupe; Cutting and welding required during installation |
FORD AEROSTAR | 4L | 1996 | Front; Cutting and welding required during installation |
FORD AEROSTAR | 4L | 1996 | Rear; Cutting and welding required during installation |
FORD AEROSTAR | 4L | 1997 | Front; Cutting and welding required during installation |
FORD AEROSTAR | 4L | 1997 | Rear; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1995 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1996 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1997 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1998 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1999 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2000 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2001 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2002 | Rear Left; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 1997 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 1997 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 1998 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 1998 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 1999 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 1999 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.2L | 1999 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.2L | 1999 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.2L | 1997 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.2L | 1997 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.2L | 1998 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.2L | 1998 | Passenger Side; Cutting and welding required during installation |
FORD E-250 ECONOLINE | 4.2L | 1997 | Driver Side; Cutting and welding required during installation |
FORD E-250 ECONOLINE | 4.2L | 1997 | Passenger Side; Cutting and welding required during installation |
FORD E-250 ECONOLINE | 4.2L | 1998 | Driver Side; Cutting and welding required during
Write a Review
Write a ReviewMagnaflowMagnaflow 99005HM Universal Federal (Exc.CA) |