Universal Fit OEM GRADE Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly. This OEM grade product contains a higher precious metal loading than the standard grade version.
US EPA and Canadian certified and approved for the vehicles listed below.
vehicle | engine | year | description |
---|---|---|---|
JEEP LIBERTY | 3.7L | 2007 | Passenger Side; Cutting and welding required during installation |
JEEP LIBERTY | 3.7L | 2005 | Passenger Side; Cutting and welding required during installation |
JEEP LIBERTY | 3.7L | 2006 | Passenger Side; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1999 | Rear Right; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2001 | Rear Right; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1998 | Rear Right; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2000 | Rear Right; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2002 | Rear Right; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1996 | Rear Right; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1995 | Rear Right; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1997 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2007 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2006 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2008 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2005 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2009 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2010 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2004 | Rear Right; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2000 | Rear Right; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2002 | Rear Right; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2001 | Rear Right; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2000 | Front Right; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2002 | Front Right; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2001 | Front Right; Cutting and welding required during installation |
LAND ROVER DISCOVERY | 4L | 1996 | Cutting and welding required during installation |
LAND ROVER DISCOVERY | 4L | 1997 | Cutting and welding required during installation |
LAND ROVER RANGE ROVER | 4.6L | 1996 | Cutting and welding required during installation |
LAND ROVER RANGE ROVER | 4.6L | 1997 | Cutting and welding required during installation |
LAND ROVER RANGE ROVER | 4.6L | 1998 | Cutting and welding required during installation |
AUDI S4 | 2.7L | 2000 | Rear Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2000 | Front Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2001 | Rear Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2001 | Front Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2002 | Rear Left; Cutting and welding required during installation |
AUDI S4 | 2.7L | 2002 | Front Left; Cutting and welding required during installation |
CHEVROLET TRACKER | 2L | 2001 | Front; Cutting and welding required during installation |
CHEVROLET TRACKER | 2L | 2002 | Front; Cutting and welding required during installation |
CHEVROLET TRACKER | 2L | 2003 | Front; Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 1997 | Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 1998 | Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 1999 | Cutting and welding required during installation |
CHEVROLET VENTURE | 3.4L | 2000 | Cutting and welding required during installation |
CHRYSLER GRAND VOYAGER | 3L | 2000 | Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2002 | Rear; Coupe; Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2003 | Rear; Coupe; Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2001 | Rear; Coupe; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.5L | 1999 | Convertible; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.5L | 2000 | Convertible; Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 1996 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 1996 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 1999 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 1999 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 2000 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 2000 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 1997 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 1997 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 1998 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 1998 | Cutting and welding required during installation |
CHRYSLER VOYAGER | 3L | 2000 | Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2004 | Rear; Coupe; Cutting and welding required during installation |
CHRYSLER SEBRING | 3L | 2005 | Rear; Coupe; Cutting and welding required during installation |
DAEWOO LEGANZA | 2.2L | 1999 | Rear; Cutting and welding required during installation |
DAEWOO LEGANZA | 2.2L | 2000 | Rear; Cutting and welding required during installation |
DAEWOO LEGANZA | 2.2L | 2001 | Rear; Cutting and welding required during installation |
DAEWOO LEGANZA | 2.2L | 2002 | Rear; Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 1996 | Cutting and welding required during installation |
DODGE CARAVAN | 3.8L | 1996 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 1996 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 1996 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 1997 | Cutting and welding required during installation |
DODGE CARAVAN | 3.8L | 1997 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 1997 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 1997 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 1998 | Cutting and welding required during installation |
DODGE CARAVAN | 3.8L | 1998 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 1998 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 1998 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 1999 | Cutting and welding required during installation |
DODGE CARAVAN | 3.8L | 1999 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 1999 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 1999 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 2000 | Cutting and welding required during installation |
DODGE CARAVAN | 3L | 2000 | Cutting and welding required during installation |
DODGE CARAVAN | 2.4L | 2000 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 1996 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 1996 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 1996 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 2.4L | 1996 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 1997 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 1997 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 1997 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 2.4L | 1997 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 1998 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 1998 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 1998 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 1999 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 1999 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 1999 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 2000 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 2000 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3L | 2000 | Cutting and welding required during installation |
DODGE STRATUS | 3L | 2001 | Rear; Coupe; Cutting and welding required during installation |
DODGE STRATUS | 3L | 2002 | Rear; Coupe; Cutting and welding required during installation |
DODGE STRATUS | 3L | 2003 | Rear; Coupe; Cutting and welding required during installation |
DODGE STRATUS | 3L | 2004 | Rear; Coupe; Cutting and welding required during installation |
DODGE STRATUS | 3L | 2005 | Rear; Coupe; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1995 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1996 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1997 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1998 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 1999 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2000 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2001 | Rear Left; Cutting and welding required during installation |
FORD CROWN VICTORIA | 4.6L | 2002 | Rear Left; Cutting and welding required during installation |
FORD ESCORT | 2L | 2003 | Cutting and welding required during installation |
FORD EXPLORER | 5L | 1999 | Driver Side; Cutting and welding required during installation |
FORD EXPLORER | 5L | 1999 | Passenger Side; Cutting and welding required during installation |
FORD EXPLORER | 5L | 2000 | Driver Side; Cutting and welding required during installation |
FORD EXPLORER | 5L | 2000 | Passenger Side; Cutting and welding required during installation |
FORD EXPLORER | 5L | 2001 | Driver Side; Cutting and welding required during installation |
FORD EXPLORER | 5L | 2001 | Passenger Side; Cutting and welding required during installation |
FORD EXPLORER | 4L | 2001 | Driver Side; Cutting and welding required during installation |
FORD EXPLORER | 4L | 2001 | Passenger Side; Cutting and welding required during installation |
FORD RANGER | 2.5L | 2001 | Rear; Cutting and welding required during installation |
FORD RANGER | 4L | 2001 | Front Left; Cutting and welding required during installation |
FORD RANGER | 4L | 2001 | Front Right; Cutting and welding required during installation |
FORD RANGER | 4L | 2002 | Rear Forward; Cutting and welding required during installation |
FORD RANGER | 4L | 2002 | Front Left; Cutting and welding required during installation |
FORD RANGER | 4L | 2002 | Front Right; Cutting and welding required during installation |
FORD RANGER | 4L | 2003 | Front Left; Cutting and welding required during installation |
FORD RANGER | 4L | 2003 | Front Right; Cutting and welding required during installation |
FORD RANGER | 4L | 1998 | Rear; Cutting and welding required during installation |
FORD RANGER | 4L | 1998 | Front Left; Cutting and welding required during installation |
FORD RANGER | 4L | 1998 | Front Right; Cutting and welding required during installation |
FORD RANGER | 4L | 1999 | Rear; Cutting and welding required during installation |
FORD RANGER | 4L | 1999 | Front Left; Cutting and welding required during installation |
FORD RANGER | 4L | 1999 | Front Right; Cutting and welding required during installation |
FORD RANGER | 2.5L | 2000 | Rear; Cutting and welding required during installation |
FORD RANGER | 4L | 2000 | Front Left; Cutting and welding required during installation |
FORD RANGER | 4L | 2000 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2004 | Rear Left; Cutting and welding required during installation |
FORD TAURUS | 3L | 2004 | Rear; Cutting and welding required during installation |
FORD RANGER | 4L | 2004 | Rear Forward; Cutting and welding required during installation |
FORD RANGER | 4L | 2004 | Front Left; Cutting and welding required during installation |
FORD RANGER | 4L | 2004 | Front Right; Cutting and welding required during installation |
FORD ESCAPE | 3L | 2005 | Rear; Cutting and welding required during installation |
FORD TAURUS | 3L | 2005 | Rear; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2005 | Rear Left; Cutting and welding required during installation |
FORD EXPLORER SPORT TRAC | 4L | 2003 | Rear; Cutting and welding required during installation |
FORD EXPLORER SPORT TRAC | 4L | 2004 | Rear; Cutting and welding required during installation |
FORD EXPLORER SPORT TRAC | 4L | 2005 |
Write a Review
Write a ReviewMagnaflowMagnaflow 51005 | 2.25" IN/OUT | Oval Body-7" Wide, 16" Overall length | Universal OEM Grade Federal (Exc.CA) Catalytic Converter1 Review Hide Reviews Show Reviews
|