Universal Fit OEM GRADE Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly. This OEM grade product contains a higher precious metal loading than the standard grade version.
US EPA and Canadian certified and approved for the vehicles listed below.
vehicle | engine | year | description |
---|---|---|---|
HYUNDAI SANTA FE | 2.4L | 2001 | Rear; Cutting and welding required during installation |
HYUNDAI SANTA FE | 2.4L | 2002 | Rear; Cutting and welding required during installation |
HYUNDAI SANTA FE | 2.4L | 2003 | Rear; Cutting and welding required during installation |
HYUNDAI SANTA FE | 2.4L | 2004 | Rear; Cutting and welding required during installation |
PONTIAC G6 | 3.5L | 2007 | Rear; Cutting and welding required during installation |
SCION XB | 1.5L | 2004 | Cutting and welding required during installation |
SCION XA | 1.5L | 2005 | Cutting and welding required during installation |
SCION XB | 1.5L | 2005 | Cutting and welding required during installation |
SCION XA | 1.5L | 2006 | Cutting and welding required during installation |
SCION XB | 1.5L | 2006 | Cutting and welding required during installation |
SUBARU LEGACY | 2.5L | 2006 | Rear; Turbocharged; Cutting and welding required during installation |
SUBARU OUTBACK | 2.5L | 2006 | Rear; Turbocharged; Cutting and welding required during installation |
SUBARU LEGACY | 2.5L | 2007 | Rear; Turbocharged; Cutting and welding required during installation |
SUBARU OUTBACK | 2.5L | 2007 | Rear; Turbocharged; Cutting and welding required during installation |
SUBARU LEGACY | 2.5L | 2008 | Rear; Turbocharged; Cutting and welding required during installation |
SUZUKI ESTEEM | 1.8L | 1999 | Front; Cutting and welding required during installation |
SUZUKI ESTEEM | 1.8L | 2000 | Front; Cutting and welding required during installation |
SUZUKI ESTEEM | 1.8L | 2001 | Front; Cutting and welding required during installation |
SUZUKI ESTEEM | 1.8L | 2002 | Front; Cutting and welding required during installation |
TOYOTA ECHO | 1.5L | 2000 | Cutting and welding required during installation |
TOYOTA ECHO | 1.5L | 2001 | Cutting and welding required during installation |
TOYOTA ECHO | 1.5L | 2002 | Cutting and welding required during installation |
TOYOTA ECHO | 1.5L | 2003 | Cutting and welding required during installation |
TOYOTA ECHO | 1.5L | 2004 | Cutting and welding required during installation |
TOYOTA ECHO | 1.5L | 2005 | Cutting and welding required during installation |
HYUNDAI TIBURON | 2.7L | 2003 | Y-Pipe Assembly |
HYUNDAI TIBURON | 2.7L | 2004 | Y-Pipe Assembly |
HYUNDAI TIBURON | 2.7L | 2005 | Y-Pipe Assembly |
HYUNDAI TIBURON | 2.7L | 2006 | Y-Pipe Assembly |
HYUNDAI TIBURON | 2.7L | 2007 | Cutting and welding required during installation |
HYUNDAI TIBURON | 2.7L | 2008 | Cutting and welding required during installation |
CHEVROLET COBALT | 2.2L | 2010 | Front; Automatic Trans; Cutting and welding required during installation |
CHEVROLET COBALT | 2.2L | 2009 | Front; Automatic Trans; Cutting and welding required during installation |
CHEVROLET COBALT | 2.2L | 2008 | Front; Automatic Trans; Cutting and welding required during installation |
CHEVROLET COBALT | 2.4L | 2008 | Front; Automatic Trans; Cutting and welding required during installation |
PONTIAC G5 | 2.4L | 2008 | Front; Automatic Trans; Cutting and welding required during installation |
PONTIAC G5 | 2.2L | 2010 | Front; Automatic Trans; Cutting and welding required during installation |
PONTIAC G5 | 2.2L | 2009 | Front; Automatic Trans; Cutting and welding required during installation |
PONTIAC G5 | 2.2L | 2008 | Front; Automatic Trans; Cutting and welding required during installation |
CHEVROLET HHR | 2.2L | 2011 | Front; Automatic Trans; Cutting and welding required during installation |
CHEVROLET HHR | 2.2L | 2010 | Front; Automatic Trans; Cutting and welding required during installation |
CHEVROLET HHR | 2.2L | 2009 | Front; Automatic Trans; Cutting and welding required during installation |
CHEVROLET HHR | 2.2L | 2008 | Front; Automatic Trans; Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.8L | 2000 | Rear Left; Automatic Trans; Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.8L | 2000 | Rear Right; Automatic Trans; Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.8L | 2001 | Rear Left; Automatic Trans; Cutting and welding required during installation |
AUDI A6 QUATTRO | 2.8L | 2001 | Rear Right; Automatic Trans; Cutting and welding required during installation |
MERCEDES-BENZ ML320 | 3.2L | 1998 | Front Left; Cutting and welding required during installation |
MERCEDES-BENZ ML320 | 3.2L | 1998 | Left Center; Cutting and welding required during installation |
VOLKSWAGEN GOLF | 1.8L | 1996 | Cutting and welding required during installation |
VOLKSWAGEN GOLF | 1.8L | 1997 | Cutting and welding required during installation |
HYUNDAI ACCENT | 1.5L | 1999 | Cutting and welding required during installation |
HYUNDAI ACCENT | 1.5L | 1998 | Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 1998 | Driver Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 1999 | Driver Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 2000 | Driver Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 2001 | Driver Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 2002 | Driver Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 2003 | Driver Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 2003 | Passenger Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 2002 | Passenger Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 2001 | Passenger Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 2000 | Passenger Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 1999 | Passenger Side; Cutting and welding required during installation |
JAGUAR VANDEN PLAS | 4L | 1998 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 1998 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 1999 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 2000 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 2001 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 2002 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 2003 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 2003 | Driver Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 2002 | Driver Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 2001 | Driver Side; Cutting and welding required during installation |
JAGUAR XJ8 | 4L | 2000 | Driver Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 2003 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 2002 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 2001 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 2000 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 1999 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 1998 | Passenger Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 1998 | Driver Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 1999 | Driver Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 2000 | Driver Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 2001 | Driver Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 2002 | Driver Side; Cutting and welding required during installation |
JAGUAR XJR | 4L | 2003 | Driver Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 2002 | Driver Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 2001 | Driver Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 2000 | Driver Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 1999 | Driver Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 1998 | Driver Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 1997 | Driver Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 1997 | Passenger Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 1998 | Passenger Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 1999 | Passenger Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 2000 | Passenger Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 2001 | Passenger Side; Cutting and welding required during installation |
JAGUAR XK8 | 4L | 2002 | Passenger Side; Cutting and welding required during installation |
JAGUAR XKR | 4L | 2000 | Passenger Side; Cutting and welding required during installation |
JAGUAR XKR | 4L | 2001 | Passenger Side; Cutting and welding required during installation |
JAGUAR XKR | 4L | 2002 | Passenger Side; Cutting and welding required during installation |
JAGUAR XKR | 4.2L | 2003 | Passenger Side; Cutting and welding required during installation |
JAGUAR XKR | 4.2L | 2004 | Passenger Side; Cutting and welding required during installation |
JAGUAR XKR | 4.2L | 2004 | Driver Side; Cutting and welding required during installation |
JAGUAR XKR | 4.2L | 2003 | Driver Side; Cutting and welding required during installation |
JAGUAR XKR | 4L | 2002 | Driver Side; Cutting and welding required during installation |
JAGUAR XKR | 4L | 2001 | Driver Side; Cutting and welding required during installation |
JAGUAR XKR | 4L | 2000 | Driver Side; Cutting and welding required during installation |
JAGUAR X-TYPE | 2.5L | 2002 | Passenger Side; Cutting and welding required during installation |
JAGUAR X-TYPE | 2.5L | 2002 | Driver Side; Cutting and welding required during installation |
JAGUAR X-TYPE | 3L | 2002 | Driver Side; Cutting and welding required during installation |
JAGUAR X-TYPE | 3L | 2002 | Passenger Side; Cutting and welding required during installation |
MERCEDES-BENZ C280 | 2.8L | 1997 | Rear; Cutting and welding required during installation |
MERCEDES-BENZ C280 | 2.8L | 1996 | Rear; Cutting and welding required during installation |
PONTIAC G3 | 1.6L | 2009 | Cutting and welding required during installation |
PONTIAC G3 | 1.6L | 2010 | Cutting and welding required during installation |
SCION XD | 1.8L | 2008 | Front; Cutting and welding required during installation |
SCION XD | 1.8L | 2009 | Front; Cutting and welding required during installation |
SCION XD | 1.8L | 2010 | Front; Cutting and welding required during installation |
SCION XD | 1.8L | 2011 | Front; Cutting and welding required during installation |
SCION XD | 1.8L | 2012 | Front; Cutting and welding required during installation |
SCION XD | 1.8L | 2012 | Rear; Cutting and welding required during installation |
SCION XD | 1.8L | 2011 | Rear; Cutting and welding required during installation |
SCION XD | 1.8L | 2010 | Rear; Cutting and welding required during installation |
SCION XD | 1.8L | 2009 | Rear; Cutting and welding required during installation |
SCION XD | 1.8L | 2008 | Rear; Cutting and welding required during installation |
VOLVO XC90 | 3.2L | 2007 | Driver Side; Cutting and welding required during installation |
VOLVO XC90 | 3.2L | 2008 | Driver Side; Cutting and welding required during installation |
VOLVO XC90 | 3.2L | 2009 | Driver Side; Cutting and welding required during installation |
VOLVO XC90 | 3.2L | 2010 | Driver Side; Cutting and welding required during installation |
VOLVO XC90 | 3.2L | 2010 | Passenger Side; Cutting and welding required during installation |
VOLVO XC90 | 3.2L | 2009 | Passenger Side; Cutting and welding required during installation |
VOLVO XC90 | 3.2L | 2008 | Passenger Side; Cutting and welding required during installation |
VOLVO XC90 | 3.2L | 2007 | Passenger Side; Cutting and welding required during installation |
VOLKSWAGEN JETTA | 2L | 2008 | Cutting and welding required during installation |
VOLKSWAGEN SCIROCCO | 1.8L | 1988 | Cutting and welding required during installation |
AUDI A6 | 2.8L | 2001 | Rear Left; Cutting and welding required during installation |
AUDI A6 | 2.8L | 2001 | Rear Right; Cutting and welding required during installation |