Universal Fit OEM GRADE Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly. This OEM grade product contains a higher precious metal loading than the standard grade version.
US EPA and Canadian certified and approved for the vehicles listed below.
vehicle | engine | year | description |
---|---|---|---|
FORD F-150 | 4.6L | 2002 | Rear Right; Cutting and welding required during installation |
FORD F-150 | 4.6L | 2003 | Rear Right; Cutting and welding required during installation |
FORD F-150 | 4.6L | 2004 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2006 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2007 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2008 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2005 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2009 | Rear Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2005 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2009 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2008 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2007 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2006 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2005 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2010 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2009 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2008 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2007 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4L | 2006 | Front Right; Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2005 | Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2006 | Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2007 | Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2008 | Cutting and welding required during installation |
FORD MUSTANG | 4.6L | 2009 | Cutting and welding required during installation |
ACURA RL | 3.5L | 1996 | Cutting and welding required during installation |
ACURA RL | 3.5L | 1997 | Cutting and welding required during installation |
ACURA RL | 3.5L | 1998 | Cutting and welding required during installation |
ACURA RL | 3.5L | 1999 | Cutting and welding required during installation |
ACURA RL | 3.5L | 2000 | Cutting and welding required during installation |
ACURA RL | 3.5L | 2001 | Cutting and welding required during installation |
ACURA RL | 3.5L | 2002 | Cutting and welding required during installation |
ACURA RL | 3.5L | 2003 | Cutting and welding required during installation |
ACURA RL | 3.5L | 2004 | Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2002 | Rear; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2002 | Rear; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2003 | Rear; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2003 | Rear; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2001 | Rear; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2001 | Rear; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2004 | Rear; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2004 | Rear; Cutting and welding required during installation |
CHRYSLER PACIFICA | 3.5L | 2004 | Cutting and welding required during installation |
CHRYSLER PACIFICA | 3.5L | 2005 | Cutting and welding required during installation |
CHRYSLER 300 | 5.7L | 2005 | Driver Side; Cutting and welding required during installation |
CHRYSLER 300 | 5.7L | 2005 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2005 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2005 | Driver Side; Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 2005 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 2005 | Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2005 | Rear; Cutting and welding required during installation |
CHRYSLER SEBRING | 2.4L | 2005 | Rear; Cutting and welding required during installation |
CHRYSLER 300 | 5.7L | 2006 | Driver Side; Cutting and welding required during installation |
CHRYSLER 300 | 5.7L | 2006 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2006 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2006 | Driver Side; Cutting and welding required during installation |
CHRYSLER PACIFICA | 3.5L | 2006 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 2006 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 2006 | Cutting and welding required during installation |
CHRYSLER 300 | 5.7L | 2007 | Driver Side; Cutting and welding required during installation |
CHRYSLER 300 | 5.7L | 2007 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2007 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2007 | Driver Side; Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.3L | 2007 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 2007 | Cutting and welding required during installation |
CHRYSLER TOWN & COUNTRY | 3.8L | 2008 | Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2008 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2008 | Driver Side; Cutting and welding required during installation |
CHRYSLER 300 | 5.7L | 2009 | Driver Side; Cutting and welding required during installation |
CHRYSLER 300 | 5.7L | 2009 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2009 | Passenger Side; Cutting and welding required during installation |
CHRYSLER 300 | 6.1L | 2009 | Driver Side; Cutting and welding required during installation |
DODGE NEON | 2L | 2001 | Except LEV and ULEV Emission Level |
DODGE NEON | 2L | 2002 | Except LEV and ULEV Emission Level |
DODGE NEON | 2L | 2000 | Except LEV and ULEV Emission Level |
DODGE NEON | 2L | 2003 | Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2001 | Rear; Sedan; Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2001 | Rear; Sedan; Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2002 | Rear; Sedan; Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2002 | Rear; Sedan; Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2003 | Rear; Sedan; Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2003 | Rear; Sedan; Cutting and welding required during installation |
DODGE NEON | 2L | 2004 | Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2004 | Rear; Sedan; Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2004 | Rear; Sedan; Cutting and welding required during installation |
DODGE MAGNUM | 5.7L | 2005 | Passenger Side; Cutting and welding required during installation |
DODGE MAGNUM | 5.7L | 2005 | Driver Side; Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 2005 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 2005 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 2005 | Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2005 | Rear; Sedan; Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2005 | Rear; Sedan; Cutting and welding required during installation |
DODGE CHARGER | 5.7L | 2006 | Passenger Side; Cutting and welding required during installation |
DODGE CHARGER | 5.7L | 2006 | Driver Side; Cutting and welding required during installation |
DODGE MAGNUM | 5.7L | 2006 | Passenger Side; Cutting and welding required during installation |
DODGE MAGNUM | 5.7L | 2006 | Driver Side; Cutting and welding required during installation |
DODGE MAGNUM | 6.1L | 2006 | Passenger Side; Cutting and welding required during installation |
DODGE MAGNUM | 6.1L | 2006 | Driver Side; Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 2006 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 2006 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 2006 | Cutting and welding required during installation |
DODGE STRATUS | 2.4L | 2006 | Rear; Sedan; Cutting and welding required during installation |
DODGE CHARGER | 5.7L | 2007 | Driver Side; Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.3L | 2007 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 2007 | Cutting and welding required during installation |
DODGE MAGNUM | 5.7L | 2007 | Passenger Side; Cutting and welding required during installation |
DODGE MAGNUM | 5.7L | 2007 | Driver Side; Cutting and welding required during installation |
DODGE MAGNUM | 6.1L | 2007 | Passenger Side; Cutting and welding required during installation |
DODGE MAGNUM | 6.1L | 2007 | Driver Side; Cutting and welding required during installation |
DODGE NITRO | 3.7L | 2007 | Cutting and welding required during installation |
DODGE NITRO | 4L | 2007 | Cutting and welding required during installation |
DODGE CARAVAN | 3.3L | 2007 | Cutting and welding required during installation |
DODGE GRAND CARAVAN | 3.8L | 2008 | Cutting and welding required during installation |
DODGE NITRO | 3.7L | 2008 | Cutting and welding required during installation |
DODGE NITRO | 4L | 2008 | Cutting and welding required during installation |
DODGE MAGNUM | 5.7L | 2008 | Driver Side; Cutting and welding required during installation |
DODGE MAGNUM | 5.7L | 2008 | Passenger Side; Cutting and welding required during installation |
DODGE MAGNUM | 6.1L | 2008 | Passenger Side; Cutting and welding required during installation |
DODGE MAGNUM | 6.1L | 2008 | Driver Side; Cutting and welding required during installation |
DODGE CHALLENGER | 6.1L | 2008 | Passenger Side; Cutting and welding required during installation |
DODGE CHALLENGER | 6.1L | 2008 | Driver Side; Cutting and welding required during installation |
DODGE CHALLENGER | 5.7L | 2009 | Driver Side; Cutting and welding required during installation |
DODGE CHALLENGER | 5.7L | 2009 | Passenger Side; Cutting and welding required during installation |
DODGE CHALLENGER | 6.1L | 2009 | Passenger Side; Cutting and welding required during installation |
DODGE CHALLENGER | 6.1L | 2009 | Driver Side; Cutting and welding required during installation |
DODGE RAM 1500 | 4.7L | 2009 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 2000 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 2000 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.6L | 2000 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.6L | 2000 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 2001 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 2001 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.6L | 2001 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.6L | 2001 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 2002 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.2L | 2002 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.6L | 2002 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE | 4.6L | 2002 | Passenger Side; Cutting and welding required during installation |
FORD E-150 | 4.2L | 2003 | Driver Side; Cutting and welding required during installation |
FORD E-150 | 4.2L | 2003 | Passenger Side; Cutting and welding required during installation |
FORD E-150 | 4.6L | 2003 | Driver Side; Cutting and welding required during installation |
FORD E-150 | 4.6L | 2003 | Passenger Side; Cutting and welding required during installation |
FORD E-150 CLUB WAGON | 4.2L | 2003 | Driver Side; Cutting and welding required during installation |
FORD E-150 CLUB WAGON | 4.2L | 2003 | Passenger Side; Cutting and welding required during installation |
FORD E-150 CLUB WAGON | 4.6L | 2003 | Driver Side; Cutting and welding required during installation |
FORD E-150 CLUB WAGON | 4.6L | 2003 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.2L | 2000 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.2L | 2000 | Passenger Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.6L | 2000 | Driver Side; Cutting and welding required during installation |
FORD E-150 ECONOLINE CLUB WAGON | 4.6L | 2000 | Passenger Side; Cutting and welding required during installation |
FORD E-150<
Write a Review
Write a ReviewMagnaflowMagnaflow 51356 | 2.5" in/out | 9" Body Length | 13" overall Length | Round | Mid-Bed o2 Sensor port | Universal OEM Grade Catalytic Converter | Use for CA emissions vehicles located outside CA/NY/ME/CO1 Review Hide Reviews Show Reviews
|