Universal Fit California Certified ARB GRADE Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly.
California Air Resources Board certified and approved for use on the vehicles listed below.
vehicle | engine | year | engine family | California EO # | description |
---|---|---|---|---|---|
CADILLAC STS | 3.6L | 2006 | 6GMXB03.6149 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC STS | 3.6L | 2006 | 6GMXB03.6149 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC STS | 3.6L | 2007 | 7GMXB03.6149 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC STS | 3.6L | 2007 | 7GMXB03.6149 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2004 | 4GMXV03.8042 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2004 | 4GMXV03.8042 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2005 | 5GMXX03.6149 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2005 | 5GMXX03.6149 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 2.8L | 2005 | 5GMXX03.6149 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 2.8L | 2005 | 5GMXX03.6149 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2006 | 6GMXB03.6149 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 2.8L | 2006 | 6GMXB03.6149 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2006 | 6GMXB03.6149 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 2.8L | 2006 | 6GMXB03.6149 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 2.8L | 2007 | 7GMXB03.6149 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2007 | 7GMXB03.6149 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2007 | 7GMXB03.6149 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 2.8L | 2007 | 7GMXB03.6149 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2008 | 8GMXB03.6148 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2008 | 8GMXB03.6148 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2009 | 9GMXV03.6053 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CADILLAC CTS | 3.6L | 2009 | 9GMXV03.6053 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET COBALT | 2.2L | 2005 | 5GMXV02.2026 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
CHEVROLET COBALT | 2.4L | 2006 | 6GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
CHEVROLET COBALT | 2.4L | 2007 | 7GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
CHEVROLET HHR | 2.2L | 2006 | 6GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
CHEVROLET HHR | 2.4L | 2006 | 6GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
CHEVROLET HHR | 2.4L | 2007 | 7GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
CHEVROLET HHR | 2.2L | 2007 | 7GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
CHEVROLET MALIBU | 3.9L | 2006 | 6GMXB03.9146 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MALIBU | 3.9L | 2007 | 7GMXB03.9142 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MALIBU | 3.6L | 2008 | 8GMXB03.6148 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MALIBU | 3.6L | 2008 | 8GMXB03.6148 | D-193-140 | Front; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.9L | 2006 | 6GMXB03.9146 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.9L | 2007 | 7GMXB03.9142 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
PONTIAC G6 | 3.6L | 2007 | 7GMXB03.6149 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.5L | 2007 | 7GMXV03.5047 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.6L | 2007 | 7GMXB03.6149 | D-193-140 | Front; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.6L | 2008 | 8GMXB03.6148 | D-193-140 | Front; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.5L | 2008 | 8GMXB03.9142 | D-193-140 | Rear; Coupe, Sedan; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.5L | 2008 | 8GMXB03.9142 | D-193-140 | Rear; Convertible; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.6L | 2008 | 8GMXB03.6148 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.5L | 2009 | 9GMXJ03.9142 | D-193-140 | Rear; Convertible; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G6 | 3.5L | 2009 | 9GMXJ03.9142 | D-193-140 | Rear; Coupe, Sedan; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G5 | 2.4L | 2007 | 7GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
SATURN ION | 2.2L | 2005 | 5GMXV02.2026 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
SATURN ION | 2.4L | 2006 | 6GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
SATURN ION | 2.4L | 2007 | 7GMXV02.4029 | D-193-140 | OE Spec; Cutting and Welding Required During Installation; Automatic Trans |
SATURN AURA | 3.6L | 2007 | 7GMXB03.6149 | D-193-140 | Front; OE Spec; Cutting and Welding Required During Installation |
SATURN AURA | 3.6L | 2007 | 7GMXB03.6149 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
SATURN AURA | 3.6L | 2008 | 8GMXB03.6148 | D-193-140 | Rear; OE Spec; Cutting and Welding Required During Installation |
SATURN AURA | 3.6L | 2008 | 8GMXB03.6148 | D-193-140 | Front; OE Spec; Cutting and Welding Required During Installation |
AUDI A6 | 3.2L | 2006 | 6ADXV03.1374 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
AUDI A6 | 3.2L | 2006 | 6ADXV03.1374 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
AUDI A6 | 3.2L | 2007 | 7ADXV03.1374 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
AUDI A6 | 3.2L | 2007 | 7ADXV03.1374 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
AUDI A6 | 3.2L | 2008 | 8ADXV03.1374 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
AUDI A6 | 3.2L | 2008 | 8ADXV03.1374 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
AUDI A6 | 3.2L | 2009 | 9ADXV03.1374 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
AUDI A6 | 3.2L | 2009 | 9ADXV03.1374 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |