Universal Fit California Certified ARB GRADE Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly.
California Air Resources Board certified and approved for use on the vehicles listed below.
vehicle | engine | year | engine family | California EO # | description |
---|---|---|---|---|---|
MINI COOPER | 1.6L | 2011 | BBMXV01.6SPD | D-193-140 | Trim John Cooper Works; OE Spec; Cutting and Welding Required During Installation |
MINI COOPER | 1.6L | 2011 | BBMXV01.6SPD | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
MINI COOPER | 1.6L | 2011 | BBMXV01.6SPD | D-193-140 | Trim S Clubman; OE Spec; Cutting and Welding Required During Installation |
MINI COOPER | 1.6L | 2011 | BBMXV01.6SPD | D-193-140 | Trim John Cooper Works Clubman; OE Spec; Cutting and Welding Required During Installation |
MINI COOPER | 1.6L | 2012 | CBMXV01.6SPD | D-193-140 | Trim S Clubman; OE Spec; Cutting and Welding Required During Installation |
MINI COOPER | 1.6L | 2012 | CBMXV01.6SPD | D-193-140 | Trim Coupe S; OE Spec; Cutting and Welding Required During Installation |
MINI COOPER | 1.6L | 2012 | CBMXV01.6SPD | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
MINI COOPER | 1.6L | 2012 | CBMXV01.6SPD | D-193-140 | Trim Roadster S; OE Spec; Cutting and Welding Required During Installation |
DODGE NEON | 2.0L | 2005 | 5CRXV02.4VE0 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
BUICK LACROSSE | 3.8L | 2005 | 5GMXX03.8148 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
BUICK LACROSSE | 3.8L | 2006 | 6GMXV03.9048 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
BUICK LACROSSE | 5.3L | 2008 | 8GMXV05.3084 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
BUICK LACROSSE | 5.3L | 2009 | 9GMXV05.3084 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
BUICK LACROSSE | 3.8L | 2009 | 9GMXV03.8047 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
BUICK LUCERNE | 3.8L | 2006 | 6GMXV03.9048 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
BUICK REGAL | 3.8L | 2004 | 4GMXV03.8042 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET COBALT | 2.0L | 2007 | 7GMXV02.0018 | D-193-140 | Trim SS; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.0L | 2007 | 7GMXV06.0081 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.0L | 2007 | 7GMXV06.0081 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2009 | 9GMXV06.2080 | D-193-140 | Passenger Side; Trim Base; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2009 | 9GMXV06.2080 | D-193-140 | Left; Trim Base; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2010 | AGMXV07.0085 | D-193-140 | Left; Trim Grand Sport; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2010 | AGMXV07.0085 | D-193-140 | Passenger Side; Trim Base; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2010 | AGMXV07.0085 | D-193-140 | Passenger Side; Trim Grand Sport; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2010 | AGMXV07.0085 | D-193-140 | Left; Trim Base; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2011 | BGMXV07.0085 | D-193-140 | Left; Trim Base; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2011 | BGMXV07.0085 | D-193-140 | Left; Trim Grand Sport; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2011 | BGMXV07.0085 | D-193-140 | Passenger Side; Trim Grand Sport; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET CORVETTE | 6.2L | 2011 | BGMXV07.0085 | D-193-140 | Passenger Side; Trim Base; OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.8L | 2004 | 4GMXV03.8042 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.4L | 2004 | 4GMXV03.8042 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.8L | 2005 | 5GMXX03.8148 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.4L | 2005 | 5GMXX03.8148 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.5L | 2006 | 6GMXV03.9048 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.9L | 2006 | 6GMXV03.9048 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 5.3L | 2007 | 7GMXV05.3084 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.5L | 2007 | 7GMXV03.5052 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.9L | 2007 | 7GMXV03.9146 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.5L | 2008 | 8GMXV03.9052 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 5.3L | 2008 | 8GMXV05.3084 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.9L | 2008 | 8GMXV03.9052 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 3.5L | 2009 | 9GMXV03.8047 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET IMPALA | 5.3L | 2009 | 9GMXV05.3084 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MONTE CARLO | 3.4L | 2004 | 4GMXV03.8042 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MONTE CARLO | 3.8L | 2004 | 4GMXV03.8042 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MONTE CARLO | 3.4L | 2005 | 5GMXX03.8148 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MONTE CARLO | 3.8L | 2005 | 5GMXX03.8148 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MONTE CARLO | 3.5L | 2006 | 6GMXV03.9048 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MONTE CARLO | 3.9L | 2006 | 6GMXV03.9048 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MONTE CARLO | 3.5L | 2007 | 7GMXV03.5052 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
CHEVROLET MONTE CARLO | 5.3L | 2007 | 7GMXV05.3084 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC SOLSTICE | 2.4L | 2007 | 7GMXV02.4031 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC SOLSTICE | 2.4L | 2008 | 8GMXV02.4031 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC SOLSTICE | 2.4L | 2009 | 9GMXV02.4031 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC GRAND PRIX | 3.8L | 2004 | 4GMXV03.8042 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC GRAND PRIX | 3.8L | 2005 | 5GMXX03.8148 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC GRAND PRIX | 3.8L | 2006 | 6GMXV03.9048 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC GRAND PRIX | 5.3L | 2007 | 7GMXV05.3084 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC GRAND PRIX | 3.8L | 2007 | 7GMXV03.9146 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC GRAND PRIX | 5.3L | 2008 | 8GMXV05.3084 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
PONTIAC G8 | 3.6L | 2008 | 8GMXV03.6049 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G8 | 3.6L | 2008 | 8GMXV03.6049 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G8 | 3.6L | 2009 | 9GMXV03.6041 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
PONTIAC G8 | 3.6L | 2009 | 9GMXV03.6041 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
SATURN ION | 2.0L | 2007 | 7GMXV02.0018 | D-193-140 | Trim Red Line; OE Spec; Cutting and Welding Required During Installation |
SATURN SKY | 2.4L | 2007 | 7GMXV02.4031 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
SATURN SKY | 2.4L | 2008 | 8GMXV02.4031 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
SATURN SKY | 2.4L | 2009 | 9GMXV02.4031 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
SATURN SKY | 2.4L | 2010 | AGMXV02.4031 | D-193-140 | OE Spec; Cutting and Welding Required During Installation |
FORD FUSION | 1.5L | 2014 | EFMXV01.5VDG | D-193-140 | OE Spec; Low Emissions Vehicles (LEV2 LEV); Cutting and Welding Required During Installation |
FORD FUSION | 1.5L | 2015 | FFMXV01.5VDG | D-193-140 | OE Spec; Low Emissions Vehicles (LEV2 LEV); Cutting and Welding Required During Installation |
FORD FUSION | 1.5L | 2016 | GFMXV01.5VDG | D-193-140 | OE Spec; Low Emissions Vehicles (LEV2 LEV); Cutting and Welding Required During Installation |
FORD MUSTANG | 5.4L | 2011 | BFMXV05.4VEK | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
FORD MUSTANG | 5.4L | 2011 | BFMXV05.4VEK | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
FORD MUSTANG | 5.4L | 2012 | CFMXV05.4VEK | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
FORD MUSTANG | 5.4L | 2012 | CFMXV05.4VEK | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
FORD MUSTANG | 5.8L | 2013 | DFMXV05.8VE2 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
FORD MUSTANG | 5.8L | 2013 | DFMXV05.8VE2 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |
FORD MUSTANG | 5.8L | 2014 | EFMXV05.8VE2 | D-193-140 | Left; OE Spec; Cutting and Welding Required During Installation |
FORD MUSTANG | 5.8L | 2014 | EFMXV05.8VE2 | D-193-140 | Passenger Side; OE Spec; Cutting and Welding Required During Installation |